Mobile Phone Data and Statistics from 2007

January 23, 2010 by admin  
Filed under Uncategorized

SoManyMobiles Mobile Phone Data and Statistics from 2007 In 2007, 1.15 billion mobile units were sold. Now according to Tomi in a post in Forum Oxford, these 1.15 Billion was split so that 805 million went to existing customers and only 300 million phones sold to new customers.

According to Informa, total number of subscribers worldwide increased by 600 million (from 2.7Billion in 2006 to 3.3 Billion in 2007) in 2007. This would mean that 300 million people got only SIM’s and no phones. I am sure this would make green lobby a bit happy because people are recycling phones icon wink Mobile Phone Data and Statistics from 2007

According to Informa, 28% of phone in 2007 were multiple (one person having more that one phone/SIM). In Europe this figure was approx. 50%.
This raises an interesting point; there is a big market for phones with dual SIM capability. It is not so simple though. There are no standards defining phone behaviour with dual . All the phones that I am aware of have a single transmitter/receiver. This means that even if you have two , they are both not active at the same time. You would have to manually choose which one is active at any point of time.
Manufacturing of dual SIM phones with two transmitter/receivers is possible but the phones will become slightly bulky and expensive. It can definitely make my life easier so I am all for them, dont know what others feel.
On the , if you lose the phone you lose both your and are totally cut off till you get atleast one replaced.

Advanced 3GPP Interference Aware Receivers

January 22, 2010 by admin  
Filed under Uncategorized

[#2: Edit Options>MightyAdsense>Adsense Code]

Receiver structures in UEs and Node-Bs are constantly being improved as products evolve and more complex features are added to HSPA. The result is improved system performance and higher user data bit rates. This trend is reflected in constantly changing UE receiver requirements in 3GPP. In 2006, 3GPP has studied further improved minimum performance requirements for UMTS/HSDPA UEs. These enhanced performance requirements are release-independent (i.e. apply also to a Rel-6 terminal with advanced receivers).

3gppReceiverTypes Advanced 3GPP Interference Aware Receivers
aware receivers, referred to as type and type 3i, were defined as extensions of the existing type 2 and type 3 receivers, respectively. The basic receiver structure is that of an LMMSE sub-chip level equalizer which takes into account not only the channel of the serving cell, but also the channel response matrices of the most significant interfering cells. HSDPA throughput estimates were developed using link level simulations, which include the other-cell model plus Orthogonal Carrier Noise Simulator (OCNS) models for the serving and interfering cells based on the two considered.

This type of receiver attempts to cancel the that arises from users operating outside the serving cell, which is also referred to as other-cell . models/profiles were developed for this other-cell in terms of the number of interfering Node Bs to consider, and their powers relative to the total other cell power, the latter ratios referred to as Dominant Interferer Proportion (DIP) ratios. For the purposes of this study item it was determined that five interfering Node Bs should be taken into account in the models. DIP ratios were defined based on three criteria: median values of the corresponding , weighted average throughput gain, and field data. Of these criteria, the one based on the ‘weighted average’ was felt to offer a compromise between the conservative, median value criteria and the more optimistic field data criteria. In addition, two were defined, one based solely on HSDPA traffic (HSDPA-only), and the other based on a mixture of HSDPA and Rel-99 voice traffic (HSDPA+R99).

HSDPA throughput estimates were then developed using link level simulations, which included the othercell models plus OCNS models for the serving and interfering cells based on the two considered. The two-branch reference receiver, referred to as a type 3i receiver, was found to offer significant gains in throughput primarily at or near the cell edge. Link level results were developed for a wide range of operating conditions including such factors as transport format, network scenario, modulation, and channel model. For example, the gains for the DIP ratios based on the weighted average ranged from a factor of 1.2 to 2.05 for QPSK H-SET6 PB3, and from 1.2 to 3.02 for VA30 for network geometries of -3 and 0 dB. This complements the performance of existing two-branch equalizers (type 3), which typically provide gain at high geometries, and thus, the combination of the two will lead to a much better user experience over the entire cell.

In addition, a system level study was conducted that indicated that a type 3i receiver provided gains in coverage ranging from 20-55% for mildly dispersive channels, and 25-35% for heavily dispersive channels, the exact value of which depends upon user location. A second system level study divided the users into two different groups depending on their DCH handover states, where the first group collected users in soft handover (between cells), and the second group collected users in softer handover (between sectors of the same cell). The results of this second study indicate that the Type 3i receiver will provide benefits for users in these two groups, increasing their throughput by slightly over 20%. With regards to implementation issues, it was felt that the type 3i receiver is based upon known and mature signal processing techniques, and thus, the complexity is minimized. With two-branch, equalizer-based receivers already available in today’s marketplace, it appears quite doable to develop a two-branch equalizer with cancellation/mitigation capabilities. Given all of the above, 3GPP concluded that two-branch cancellation receivers are feasible for HSDPA, and a work item has been created to standardize the performance requirements with type 3i receiver.

More on this topic is available in the following:

Incoming search terms for the article: